Just browsing and I thought I might offer some additional troubleshooting items. I don't know what you are connecting to the generic switch, but it would be helpful if you were to use a desktop or laptop. Configure the computer to be on the same IP subnet as the rest of your network defined in the Belkin router. I would suggest doing it while connected to the Belkin. You should only need to set up the IP address, subnet mask, and DNS servers. You should be able to get that information from the DHCP scope on the Belkin router, or you can get it from one of your computers connected to the wired or wireless environment. To view the information (using a Windows workstation), you can go into the network setup, or go to the command prompt and type in "ipconfig /all". Once you know that computer is working, then disconnect it from the Belkin, connect it to the generic switch, and the connect the switch to the Belkin. In theory, you should be able to connect to the same things you were able to connect to before. If you can't, then there is a problem between the Belkin and the switch. If there is still a problem: * Is there a status light on either devices that shows that there is a connection and / or activity? * On some switches / routers, there is a physical switch (button) that controls whether the port is a crossover port. Is there one on these devices? That's my 2 cents worth. I hope it helps...